Fujikura Fusion Splicer FSM-62S
Fujikura Fusion Splicer FSM-62S
Specification
The Fujikura 62S provides active core alignment splice loss performance while utilizing a conventional wind protector and tube heater design. An alternative to the fully
automated core-alignment model 70S, the 62S includes an auto-start feature for both the splicing and tube heating process that minimizes the steps necessary to process splices. With a shrink time of 23 seconds with standard splice sleeves, the 62S ensures a high level of productivity. Incorporating the proven ruggedized features pioneered
by Fujikura, durability is greatly enhanced by a mirrorless optical system and “severe- impact resistant” monitor. Battery capacity is 200 splices/shrinks. The transit case
doubles as a built-in or mobile workstation and makes splicing easier than ever.
Key Features
- 5,000 splices electrode life
- 23 second tube heating time with standard sleeves
- Fully ruggedized for shock, dust and moisture
- Li-ion battery with 200 splices/shrinks per charge
- 5 mm cleave length for splice on connector or small package needs • Sheath clamp or fiber holder operation
- Internet software upgrades
- Multi-function transit case with integrated workstation
Specifications
PARAMETER VALUE
Model 62S Fusion Splicer
Applicable Fibers Single-mode (G.652 and G.657), Multimode (G.651), DS (G.653), NZDS (G.655)
Cladding Diameter 80 μm to 150 μm
Coating Diameter 100 μm to 1,000 μm
Fiber Cleave Length 5 to 16 mm
Typical Average Splice Loss 0.02 dB with SM, 0.01 dB with MM, 0.04 dB with DS, 0.04 dB with NZDS, measured by cut-back method relevant to ITU-T standards Splicing Time ULTRA FAST mode — 6 seconds; SM FAST mode — 7 seconds; SM AUTO mode — 10 seconds with SM fiber
Arc Calibration Method Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available
Splicing Modes 100 preset and user programmable modes
Splice Loss Estimate Based upon dual camera core axis alignment data
Storage of Splice Result Last 10,000 results stored in the internal memory
Fiber Display X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation
Magnification 320X for single X or Y view, or 200X for X and Y view
Viewing Method Dual cameras with 4.7 inch TFT color LCD monitor
Operating Condition 0 to 5,000 m above sea level, 0 to 95%RH and -10 to 50°C respectively
Mechanical Proof Test 1.96 to 2.25N
Tube Heater Built-in tube heater with 30 heating modes; auto-start function
Tube Heating Time Typical 23 seconds with FP-03 sleeve, 17 seconds with FP3 (40), 5-16 seconds with Fujikura micro sleeves,
Protection Sleeve Length 60 mm, 40 mm, micro
Splice/Heat Cycles with Battery Typical 200 cycles with power save functions activated
Electrode Life 5,000 Arc Discharges
Power Supply Auto voltage selection from 100 to 240 V AC or 10 to 15 V DC with ADC-18, 14.8 V DC with BTR-09 battery
Terminals USB 1.1 (USB-B type) for PC communication. Mini-DIN (6-pin) for HJS-02/03
Wind Protection Maximum wind velocity of 15 m/s (34 mph)
Dimensions 146 W x 159 D x 150 H (mm) / 5.75 W x 6.25 D x 5.9 H (inches)
Weight 2.5kg (5.5 lbs) with AC adapter ADC-18: 2.7kg(5.95 lbs) with BTR-09 battery
>NEOFIBO能提供什么?
我们提供全系列的高质量和全面的光纤产品，包括跳线生产机，抛光夹具，如Seikoh Giken, Senko, Domaille或定制的;采购产品抛光消耗品，工具，清洁，工具包，测试设备，拼接项目。我们承诺为您提供有吸引力的价格，优良的质量和快速交货!
>送货费是多少?
所列价格都是深圳离岸价。您指定的快递员可以接受。否则，我们将使用联邦快递、DHL、UPS或任何其他货运代理，并收取相应的费用。
>这批货怎么发货?
对于普通库存项目，将在付款确认后的1-2个工作日内发货。然而，对于缺货物品，预计交货期为3-10个工作日。
>我怎样订购这些货物?
NEOIFBO很高兴为我们宝贵的客户提供三个订购渠道，即:，网上订购，传真订购表格，并通过邮件发出正式的采购订单。
>NEOFIBO产品的保修期如何?
所有产品均由NEOFIBO保证(消耗品，正常损耗和磨损除外)，保质期为自购买之日起一年内。任何在材料或工艺上有缺陷并如NEOFIBO指定的那样退回给NEOFIBO的部件，运费已预付，由NEOFIBO选择修理或更换，作为独家补救措施。
